Cart
French English
 
 
 
 
 
 
  Categories
     Home     Informations     Catalog     Partners     Contact    My Account     
  Wind turbines
  Solar Modules
  Solar Systems
  Wind Solar Systems
  Charge Controllers
    Outback
    Morning Star
    Xantrex
    Blue Sky
    BZ Products
  Inverters
  Solar Batteries
  Solar Air Conditioner
  Hydro generator
  Solar Heating System
  System Monitoring & Meters
  Solar Hot Water
  Solar Lighting System
  Solar Pool System
  Wind Solar Lighting System
  Solar Pumping System
  Wind Pumping System
  Wind Solar pumping System
  Back Up System
  Energy Efficient Products
  Trackers
  Solar Accessories
   
OutBack Flex Max 60 amp Charge Controller
[FM60]
744 $CA


Rated for up to 60 amps of DC output current, the OutBack MX60 can be used with battery systems from 12 to 60 vdc with a PV open circuit voltage as high as 140 voc. The MX60's set points are fully adjustable to allow use with virtually any battery type, chemistry, and charging profile.The OutBack MX60 allows you to use a higher output voltage PV array with a lower battery voltage - such as charging a 24 vdc battery with a 48 vdc PV array. This reduces wire size and power loss from the PV array to the battery location while maximizing the performance of you system and saving you money!The OutBack MX60 comes standard with an easy to use and understand display. The four line, 80 character, backlit LCD display is used for programming and monitoring of the system's operation including built-in Data Logging with 64 days of memory.

Outback Charge Controller and Accessories Sizing Recommendations for MPPT Charge Controllers:
Please remember that the amperage rating for MPPT Charge Controllers is based on the output current to the battery. The Charge Controller should be sized so that it equals approximately 80% of the incoming PV array amperage. For example, the input array amperage on an MX60 should be limited to 42 amps in order to obtain the maximum boosting advantage to the battery

SPECIFICATIONS

MX60

Output Current Rating

60 amps DC Maximum at 12, 24 or 48 VDC

Nominal Battery Voltage

12, 24, 32, 36, 48, 54 or 60 VDC (programmable)

PV Open Circuit Voltage

125 VDC Maximum

Standby Power Consumption

Less than 1 watt typical

Charging Regulation Methods

Five Stage: Bulk, Absorption, Float, Silent, Equalization

Voltage Regulation Setpoints

Equalization Voltage

Adjustable 1.0 to 5.0 VDC above Bulk Setpoint

Temperature Compensation

Programmable slope -2.0mV/oC/Cell to -5.0mV/oC/Cell

 

Voltage Step-Down Capability

Can charge a 12 or 24 VDC battery from a 48V nominal PV array

 

Power Conversion Efficiency

99.1% @ 40 amps Output 97.3% @ 60 amps Output

 

Digital Display

4 line 80 character backlit LCD Display

 

Remote Interface RJ

45 Modular Connector CAT 5 Cable 8 wire

 

Operating Temperature Range

-40 to 60°C Power derated above 25°C

 

Environmental Rating

Indoor Type 1

 

Conduit Knockouts

Two 3/4 - 1” on the back; One 1” - 1 1/2 “ on each side; Two 1” - 1 1/2” on the bottom

 

Warranty

Two years parts and labor Optional Extended Warranty

 

Dimensions (HxWxD)

14.5 “ x 5.75” x 5.75” (368 x 146 x 146 mm)

 

Shipping Dimensions(HxWxD)

17.75” x 10” x 7” (451 x 254 x 178 mm)

 

Shipping Weight

12 lbs. (5.4 kg)

 

Shipping:
View PDF Datasheet

 
Manufacturer Info
 Other products

5500 W Grid Wind Solar Tilting System
5500 W Grid Wind Solar Tilting System
36,901 $CA
36,260 $CA