Cart
French English
 
 
 
 
 
 
  Categories
     Home     Informations     Catalog     Partners     Contact    My Account     
  Wind turbines
  Solar Modules
  Solar Systems
  Wind Solar Systems
  Charge Controllers
  Inverters
    Outback
    Samlex
    Magnum
    Xantrex
    Morning Star
  Solar Batteries
  Solar Air Conditioner
  Hydro generator
  Solar Heating System
  System Monitoring & Meters
  Solar Hot Water
  Solar Lighting System
  Solar Pool System
  Wind Solar Lighting System
  Solar Pumping System
  Wind Pumping System
  Wind Solar pumping System
  Back Up System
  Energy Efficient Products
  Trackers
  Solar Accessories
   
2400 W 48 V 230 Vac 50 Hz Xantrex Modified Sinus
[DR2448E]
1,191 $CA

DR2424E Inverter 2400 watts 24 volts 50 Hz Export

The DR Inverter/Charger provides dependable modified sine wave power for businesses, homes and workshops. Available in 1500, or 2400 watt models, it can power most common electrical applicances such as lights, televisions, cash registers, refrigerators, washing machines, computers, and power tools. The DR's high surge capacity gives it the ability to start difficult motor loads. Once set up, all funcions of the inverter/charger are fully automatic.

Features

  • Quiet, high efficiency operation.
  • Front panel LED indicators and adjustable switch selectors.
  • Selectable settings for flooded lead acid, gel, or absorbed glass mat (AGM) batteries.
  • Three-stage battery charging (bulk, absorption, and float) for increased performance.
  • Low battery, overload, and high battery, over temperature protection circuitry.
  • Fast switching (grid to battery and battery to grid) for backup power.
  • Low idle current (less than one watt) conserves energy when no loads are present.
  • Generator compatible.

Options

  • Remote battery temperature sensor (BTS) increases battery performance and life.
  • Remote control and status indicator (RC8) allows you to view system status remotely.
  • Side mount conduit box (DRCB) makes code-compliant DC wiring connections convenient.

Electrical Specifications
AC Input Voltage: 230 VAC
AC Input Low Transfer Voltage: 80 - 210 VAC
Maximum AC Input Current: 30 amps AC
Continuous Power (@25C): 2400 VA
Efficiency (Peak): 94%
Output Voltage (RMS): 230 VAC
Maximum Output Voltage Regulation: +-5%
Frequency (Nominal): 50 Hz +- 0.04% crystal controlled
Continuous Output (@25C): 10.5 amps AC
Surge Capability 1 mS : 40 amps AC
Automatic Transfer Relay: 15 amps
DC Input Voltage (nominal): 25.2 VDC
DC Input Voltage Range: 21.8 - 31 VDC
DC Current at Rated Power: 120 amps DC
Idle Consumption (Typical at Full Voltage): < 10 watts
Search Mode Consumption: < 1 watt
Low Battery Protection (Enabled): 11 VDC
Maximum Charge Rate (Adjustable): 70 amps DC
Waveform: Modified sine wave
Load Sensing (Inverter Mode): Adjustable 5 to over 100 watts (5 watts default)
Power Factor (Allowed): 0.5 to 1.0 pf

General Specifications
Specified Temperature Range: 32F to 104F (0C to 40C)
Enclosure Type: Indoor, ventilated, steel chasis with powdercoat finish
Unit Weight: 44 lbs / 20 kg
Inverter Dimensions (HxWxD): 8.5" x 22" x 7.25" / 21.6 x 55.9 x 18.4 cm
Shipping Weight: 48 lbs / 21.8 kg
Shipping Dimensions (HxWxD): 13" x 25" x 12" / 33 x 63.5 x 30.5 cm
Mounting: Horizontal wall mount
Warranty: 2 years

Features and Options
Forced Air Cooling: Standard - forced air variable speed fan.
Charging Profiles: Eight standard with two equalize profiles.
Three-stage Charging: Standard - three-stage (bulk, absorption, and float).
Series Stacking Operation: Standard for 120 VAC 60 Hz units only - Requies two units.
DRCB - Optional, conduit box for side mount for code-compliant DC wiring connections.
RC8 - Optional, remote control and status indicator.
BTS - Optional, battery temperature sensor for increased battery performance.

Regulatory Approvals
CE Mark

Shipping:

 
Manufacturer Info
 Other products

1050 W Wind Tilting System
1050 W Wind Tilting System
13,942 $CA
13,751 $CA