Kyocera, 210 Watt PV Solar Module
Kyocera's advanced cell processing technology and automated production facilities produce a highly efficient multi crystal photovoltaic module. The conversion efficiency of the Kyocera solar cell is over 16%. These cells are encapsulated between a tempered glass cover and a pottant with back sheet to provide efficient protection from the severest environmental conditions. The entire laminate is installed in an anodized aluminum frame to provide structural strength and ease of installation. Equipped with plug-in connectors.
Applications
- Residential roof top system
- Large commercial grid tie system
- Water Pumping Systems
- High Voltage stand alone systems
Qualifications
Module: UL 1703 certified
Factory: ISO9001 and ISO 14001
Performance Warranty
1 year limited warranty on material and workmanship
20 year limited warranty on power output
Electrical Specifications
Model: KC200GT
Tolerance: +10% / -5%
Maximum Power Voltage: 26.3 volts
Maximum Power Current: 7.61 amps
Open Circuit Voltage: 32.9 volts
Short Circuit Current: 8.21 amps
Length (LxWxH): 56.2" x 39.0" x 1.4" / 1425 x 990 x 36 mm
Weight: 40.7 lbs. / 18.5 kg
Thermal Parameters
Nominal Operating Cell Temperature: 47 C
Isc Current temperature coefficient: (3.18 x 10**-3) V/C
Voc Voltage temperature coefficient: (-1.23 x 10**-1) V/C
Note: The electrical specifications are under test conditions of irradiance of 1 kw/m**2, Spectrum of 1.5 air mass and cell temperature of 25 C.
Quality Assurance
- Thermal cycling test
- Thermal shock test
- Thermal/Freezing and high humidity cycling test
- Electrical isolation test
- Hail impact test
- Mechanical, wind and twist loading test
- Salt mist test
- Light and water-exposure test
- Field exposure test
|