Kaneka G-SA060 Watt 48 Volt Nominal PV Module
Note: The panels below are high voltage to be used for Grid Tie and Water Pumping applications. They will not work with charge controllers that do not accept a 67 VDC input.
These Kaneka panels are of excellent quality and efficiency. Because of their high voltage, they are recommended for grid-tie and water pumping applications. They rate very high in PTC ratings, according to the California Energy Commission.
Purchase your investment in bulk and save money
Highlights:
- Thin-film amorphous silicon panel
- Superior performance under high temperature
- High shade tolerance
- MC 3 Connectors
- Black frame
- Dimensions 39" x 37.8" x 1.57" (990 x 960 x 40mm)
- Weight 30.14 lbs. (13.7kg)
Model
|
GEA / GSA
|
Nominal Power (W)
|
60
|
Voc Voltage (V)
|
92
|
Isc Current (A)
|
1.19
|
Vmpp Voltage (V)
|
67
|
Impp Current (A)
|
0.9
|
Certifications and Qualifications
GEA
|
GSA
|
- IEC61646
- Safety Class II equipment
- CE mark
|
- UL Listed
- CEC registered
|
25 Year Power Output Warranty: GSA PV module will maintain more than 80% of minimum rated power for 25 years based on data from silicon PV modules installed over a month under conditions of 25°C, A.M. 1.5 and 1000 W/m2
UniRac Top of Pole racks for Kaneka Modules
The only way to mount these modules on a Pole Top rack in compliance with the manufacturer's requirements is to bolt aluminum "C-channel" to the backs of the modules in an east-west direction using the bolt holes in the frames, and then mount the panels to the rack by bolting thru the C-channel into the slot in the top of the north-south rails.
Direct Power and Water Top of Pole Racks
DP & W part number is DP-TPMx-KN60 where x is the number of modules
Iron Ridge (Two Seas Metalworks) Top Of Pole Mounts
1 Panel Top Of Pole = UNI-TP/02
2 Panel Top Of Pole = UNI-TP/04
4 Panel Top Of Pole = UNI-TP/08
6 Panel Top Of Pole = UNI-TP/12
|
Shipping: |
|
|